ATS RC Planes

RC Radio Control NO SPARK ARMING Switches

 

 

NO-SPARK

High Current Arming Switch With XT60 Connectors

Heavy Duty 12AWG Wire

Arming Switch with XT60 Connectors

With XT60 Connectors and HD 12awg Wires

 PART # 6996

 

No More Damage to your Expensive Battery Connectors

You won't have to uncover your hardware to unplug the battery to turn your vehicle off

 

EASY TO INSTALL!

 

A must for Electric RC  airplanes. Simply Mount the No-Spark push button where you can grip the plane and press the pushbutton with one hand for one hand use. Connect the ESC, remove arming jumper, then connect your battery.

Ideal for High voltage Configurations

 

 A MUST for 8S or Higher 

 

Simply hold down push button for 2-3 sec to charge the capacitors with limited current.  This will eliminate the nasty arching when the arming plug is plugged into the Arming Switch.

This pre-assembled No-Spark arming switch is GREAT for electric RC airplanes, helicopters, boats, cars or anything using a  battery pack.  With the pre-installed XT60 connectors it is SUPER EASY and FAST  to plug in your battery pack and ESC (electronic speed control) AND there is no soldering required. You won't have to uncover your hardware and unplug the battery to turn your vehicle off.

 

Picture above is showing the plug removed

 

12AWG NO SPARK Arming Switch #6996

Only $16.95

 

OUT OF STOCK

 

 

 

***We Gladly Accept Visa, MasterCard, Discover***

American Express & Electronic Checks Using Paypal

[Home]    [Support]  [Ordering Info]  [Company Info]  [Contact Us]  [Email Us]