ATS RC Planes, Home

ATS

HYPERION ADAPTER HARNESS

FOR FIRMWARE/PC LOGGING ON EOS6XX CHARGE

 

Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS06xx Series Chargers, for PC Connections.

To connect a Hyperion Balance Charger with Data Port to PC, you will need:

* This Harness, HP-EOS06-PCCBL (You need this harness to go along with the USB Programming Adapter below)
* HP-TI-PRGUSB USB-to-Serial Adapter

Once Connected to PC, these functions would be available:


For Chargers EOS0610i NET and EOS0610i DUO


- Firmware Upgrades (see 0610i upgrade manual for connection details)
- PC Logging Software (PC soft avail about May 1st 2008)

For Chargers EOS0606i DC and EOS0606i AC/DC
- PC Logging Software (PC soft avail about June 1st 2008)

 

Hyperion Firmware Adapter Harness

 

Only $1.95

 

 

 

Hyperion USB to Serial Adapter

HP-TI-PRGUSB

 

(You need this Cable Along WITH the Firmware Adapter Harness above)

 

CHARGERS & Cell Balancer

Multi-Adapter Balancer Harnesses

for EOS LBA10 & Hyperion Balance Chargers

 

Hyperion Temperature Sensor

 

 

***We Gladly Accept Visa, MasterCard, Discover***

American Express & Electronic Checks using Paypal

[Home]   [Support]  [Ordering Info]  [Company Info]  [Contact Us]  [Email Us]