ATS RC Planes
LBA 10 Net Cable/Adapter Set
This cable and Adapter set is for Networking two LBA10 Balancers together, for balance charging two packs as one 7S to 12S pack.
Network Cable (for NET PORT)
One 4mm Female-Female adapter to serial-connect LBA10 Input leads together.
The LBA10 Balancer user's manual explains how to use this cable and connector set, in order to balance charge two packs of same make and capacity as if they were a single pack, using two LBA10 networked together in Master-Slave modes. After such balance charging, you may safely connect the two packs together in Serial or Parallel as you wish, (for example, two packs of Hyperion LVX-5000-4S, connected in series after balance charging to make an 8S 5000mAh pack).
HYPERION LBA10 BALANCER DATA PORT CABLE
LBA 10 Net Data Port Cable
Data Port Cable for connecting LBA10 Balancer to compatible Hyperion Chargers, in order to view individual cell voltages during the charge process.
HYPERION LBA10 NET
BALANCER DATAPORT CABLE
***We Gladly Accept Visa, MasterCard, Discover***
American Express & Electronic Checks using Paypal
[Home] [Support] [Ordering Info] [Company Info] [Contact Us] [Email Us]